Table of Contents

  • Open this section 1. Notices and Trademarks
    • 1.1. Technical Support
    • 1.2. Disclaimer of Warranties and Liabilities
    • 1.3. Trademarks
  • Open this section 2. Introduction
    • 2.1. Running cNx Suite
    • 2.2. Software Updates
    • 2.3. Tutorial and Sample Files
  • Open this section 3. Handling Samples and Spectra
    • Open this section 3.1. Sample Preparation
      • Preparing Filter Tubes for Sample Filtration
      • Filtering the Sample through Microcentrifuge Filter Tube
      • Internal Standard Solution
    • Open this section 3.2. Spectral Data Acquisition
      • Pulse Sequences
      • Required NMR Parameters
    • Open this section 3.3. Spectral Data Processing
      • Data Processed with Other Software
  • Open this section 4. Processor
    • 4.1. Overview
    • Open this section 4.2. Information Tools
      • Spectrum Details (Sidebar)
      • Processing History (Sidebar)
      • Calibration Tool
    • Open this section 4.3. Processing Steps
      • First Step: Line Broadening
      • Second Step: Phase Correction
      • Third Step: Baseline Correction
      • Advanced baseline correction
      • Fourth Step: Shim Correction
      • Fifth Step: Calibrate CSI
      • Sixth Step: Send to Profiler
    • Open this section 4.4. Optional Steps
      • Region Deletion
      • Reverse Spectrum
      • Define Custom CSI
      • Calibrate pH
      • Export as JCAMP-DX
  • Open this section 5. Profiler
    • 5.1. Overview
    • Open this section 5.2. Profiling Tools
      • Compound Table
      • Cluster Navigator
      • Enforce Transform Windows
      • Scale Concentrations
      • pH Tool
      • Statistics Tool
      • Colors/Stars/Pins/Remember Selection
      • Peak Annotations
    • Open this section 5.3. Manual Profiling
      • First Step: Identify Compounds
      • Second Step: Determine Compound Concentrations
      • Third Step: Profile Overlapped Regions in a Spectrum
    • Open this section 5.4. Advanced controls
      • Minimal transform windows
      • Manual locking of concentrations
      • Manual locking of peak clusters positions
      • Custom calibration of peak cluster centers ranges for automated procedures
    • Open this section 5.5. Automatic Profiling using a semi-automated approach
      • First Step: Cluster positioning using Compound Snapper
      • Second Step: Concentration optimization using Fit Concentrations
    • Open this section 5.6. COMPLETE Autofit: fully automated profiling approach
      • How to use COMPLETE AUTOFIT
      • Tips and Limitations of COMPLETE Autofit
      • Note about Legacy Autofit
    • 5.7. Mutliprofiles and profile management
    • Open this section 5.8. Importing and Exporting Data
      • Import Profile
      • Export Profiled Compounds
      • Export Compound Table
      • Batch Export
      • Send to Processor
    • Open this section 5.9. Advanced Topics and Functionalities
      • Indirect determination of CSI line width
      • Use of an Eretic Signal
      • Determination of concentrations using an Eretic signal
  • Open this section 6. Library Manager
    • 6.1. Overview
    • Open this section 6.2. Library Tools
      • Compound Table
      • Quick Searches
      • Add Compounds
      • Export Compounds
      • Send to Compound Builder
      • Remove Compounds
      • Update Compounds
    • Open this section 6.3. Compound Set Tools
      • Compound Sets (Sidebar)
      • Automatic Compound Sets
      • Compound Sets
      • Smart Compound Sets
      • Rename Compound Sets
      • Remove Compound Sets
    • Open this section 6.4. Reference Card Editor
      • Required Details
      • Optional Details
    • Open this section 6.5. Information Tools
      • Reference Card Panel (Sidebar)
  • Open this section 7. Batching and Binning (PRO Only)
    • Open this section 7.1. Batching
      • Batch Import
      • Batch Process
      • Batch Edit
      • Batch Fit
      • Batch Operations on Selected Compounds or Clusters
      • Batch Spectral Alignment
    • 7.2. Spectral Binning
  • Open this section 8. Compound Builder (PRO Only)
    • 8.1. Overview
    • Open this section 8.2. Information Tools
      • Compound Details
      • Information Panel
      • Cluster Navigator
    • Open this section 8.3. Build a Compound
      • First Step: Sample Preparation and NMR Acquisition
      • Second Step: Process your Spectrum in Processor
      • Third Step: Import new CNX file into Compound Builder.
      • Fourth Step: Add Peaks, Define Clusters and Optimize Shapes
      • Fifth Step: Set Transform Windows
    • Open this section 8.4. Optional Steps
      • Compound Fit Style
      • Import Simulation
      • Generate Cluster for Region
      • New Compound
      • Manage Cluster IDs
      • pH Sensitivities
  • Open this section 9. Spin Simulator
    • 9.1. Overview
    • Open this section 9.2. Simulating Tools
      • New Simulation
      • Spin Systems
      • Spin Definitions
      • Spin Navigator
      • J-Modifiers
    • Open this section 9.3. Information Tools
      • Spin Definition (Sidebar)
      • Simulation Details
  • Open this section 10. The Basics
    • Open this section 10.1. File Management
      • Open Files
      • Importing Spectra
      • Saving Files
      • Closing Files
      • Undo and Redo
    • Open this section 10.2. Preferences
      • Change Columns
      • Display Options
    • Open this section 10.3. Sidebar
      • Legend
      • Files
      • Reference Cards
      • Quick Searches
      • Spectrum Details
      • Processing History
      • Compound Sets
      • Simulation
    • Open this section 10.4. Spectrum Graph
      • Spectrum Thumbnail
      • Select Region
      • Spectrum Overlays
      • Zoom Tools
      • Saving and recalling view settings
      • Export Spectrum Image
      • Copy Spectrum Image to Clipboard
cNx Suite User Guide logo

Search Results (close)

This is where the search results appear

5.7 Mutliprofiles and profile management

Since version 12.5, a cnx file can contain multiple profiles. A cnx file containing several profiles can be read by prior versions of the software, but only the first or ‘main” profile will be seen and available. Making modifications to the file with a prior version and saving the changes will result in the loss of the other profiles.

COMPLETE autofit can output its fitting solutions as either single-profile cnx files per fit attempt, or as cnx files containing multi-profile, where each profile corresponds to a fit attempt, resulting in significant saving in disk space.

When using the latter option, the profiles are sorted in terms of chi-square quality, where the first or “main” profile corresponds to the best solution, the second profile the second-best solution, etc.

Profile selection and management capabilities are accessible via the mini-toolbar located over the compound table:

Image of the Profiler main window

❶

The active profile can be selected from the Profile selector pull-down menu.

❷

A multi-line text description can be tagged to any profile using the Profile Information icon

❸

Profiles can be added to the available list, either starting from an empty profile or by duplicating any available profile.

❹

Profiles (individual profile or range of profiles) can also be deleted. The command first or “main“ profile cannot be deleted, but can be swapped for another available profile (see point 5 below).

❺

Profile swapping tool. Any available profile can be made the “main” profile. The main profile will be swapped for the selected profile, and the positions of the profiles will also be swapped in the list of available profiles. For instance, if profile #5 is selected and made the main profile, profile #5 will be occupy position #1 and vice-versa after the swap.


Prev Up Next
5.6 COMPLETE Autofit: fully automated profiling approach Home 5.8 Importing and Exporting Data
© 2025 Chenomx Inc.

Last modified: 21 Nov 2025